metrology.sound_calibrator

La referencia de la API se publica en inglés en los dos idiomas: se genera a partir de los docstrings del código, que son su texto original.

Sound calibrators (IEC 60942:2017): the class tables and the verdict on one.

A calibrator is the one instrument every calibrated level in this library leans on: phonometry.metrology.sensitivity turns its tone into the factor that converts digital units into pascals, so an error in the tone is an error in every level measured after it. IEC 60942:2017 (EN IEC 60942:2018) says how good the tone has to be, in three classes: LS (laboratory standard), 1 and 2, with the designations LS/M and 1/M for pistonphones that meet their class only once a static-pressure correction from the manufacturer is applied (5.1.5, Table 1).

What is graded. Every requirement of the standard that is a measured number with an acceptance limit and a maximum-permitted uncertainty:

level (5.3.2): Table 2, with the maximum uncertainty of Table A.1, for the level at the nominal supply voltage and at each end of the supply range alike (5.3.4, A.5.5.7, A.5.5.8);
fluctuation (5.3.3): Table 2, with Table A.1;
frequency (5.4.2): Table 4, with Table A.2;
distortion (5.6): Table 7, with Table A.3;
supply_voltage (5.3.4): Table 3, with the maximum A.5.5.7 and A.5.5.8 print in their text;
environmental_level (5.5): Table 5, or the reduced limits of A.6.4.7, with Table A.4;
environmental_level_in_band (A.6.2.4): Table 2, with Table A.4, for the static pressures of the A.6.2 sweep that fall inside the band of 5.3.2;
environmental_frequency (5.5): Table 6, or A.6.4.7, with Table A.5;
field_immunity (5.9.4.2): the limits 5.9.4.2 prints, with the maximum of A.7.4.8.

Each is judged by the conformance rule of IEC TC 29 (phonometry.metrology.verify_conformance, 5.1.15): the measured deviation within the acceptance limit and the laboratory’s actual expanded uncertainty within the maximum permitted, both inclusive. The deviation limits of the level, the supply-voltage effect, the frequency and the field immunity bound an absolute difference, so a signed deviation is judged against $\pm$ the limit; the short-term fluctuation and the total distortion + noise are magnitudes, judged against zero and the limit.

The tables. Tables 2, 5 and 7 and Tables A.1, A.3 and A.4 are keyed by a range of nominal frequencies, published as tuples of CalibratorTableRow; Tables 3, 4 and 6 and Tables A.2 and A.5 hold one figure per class, published as read-only mappings keyed by "LS", "1" and "2". A dash in the printed table, the ranges of nominal frequency “for which this document provides no acceptance limits”, is None: classes LS and 2 are specified only from 160 Hz to 1 250 Hz, and 5.1.2 forbids stating conformance where there is no limit, so verify_sound_calibrator refuses such a nominal frequency rather than grading it against a neighbouring row.

The /M correction is an input. A class LS/M or 1/M pistonphone’s output follows the ambient static pressure, and its manual gives the correction to the reference 101,325 kPa (5.1.5, 6.3 i). That correction depends on the barometer reading and on data only the manufacturer has, so this module does not compute it: the caller supplies it as SoundCalibratorMeasurements.static_pressure_correction_db and it is added to the measured level before the level is graded (5.3.2, A.5.1.2, B.4.3.2). Every other calibrator shall not need any environmental correction (5.1.7), and is refused one.

The abbreviated environmental test. A.6.4 lets a laboratory replace the full temperature and humidity tests (A.6.5 to A.6.7) with a few combined conditions judged against tighter limits: Table 5 reduced by 0,05 dB for classes LS and 1 and by 0,10 dB for class 2, and 0,5 %, 0,5 % and 1,3 % for the frequency (A.6.4.7). A calibrator that meets those is deemed to conform; one that does not is not thereby non-conforming, it has to be given the full tests (A.6.1.2). environmental_test="abbreviated" applies the reduced limits and the verdict means exactly that. The static-pressure sweep of A.6.2 is not part of the abbreviated test, so environmental_level_in_band keeps Table 2 whichever test is chosen.

What a verdict here is and is not. It grades the numbers a laboratory measured; it measures nothing. The requirements that are not numbers with a tolerance (the markings and the manual of Clause 6, the stabilization time of 5.1.10, the supply indicator of 5.7, the radio-frequency emission limits of 5.9.2 and the electrostatic discharges of 5.9.3) are hardware and paperwork checks outside it. And 5.1.18 is explicit that full conformance needs both halves: the model passing the pattern evaluation of Annex A and the specimen passing the periodic tests of Annex B, whose own verdict names only what was tested (B.6 g, h).

Auto-generated from the source docstrings by scripts/generate_api_docs.py (make api-docs). Do not edit by hand.

ABBREVIATED_FREQUENCY_ACCEPTANCE_LIMITS_PERCENT

Constant (mapping).

ABBREVIATED_FREQUENCY_ACCEPTANCE_LIMITS_PERCENT = {'LS': 0.5, '1': 0.5, '2': 1.3}

ABBREVIATED_LEVEL_REDUCTIONS_DB

Constant (mapping).

ABBREVIATED_LEVEL_REDUCTIONS_DB = {'LS': 0.05, '1': 0.05, '2': 0.1}

CALIBRATOR_CLASSES

Constant (tuple).

CALIBRATOR_CLASSES = ('LS', 'LS/M', '1', '1/M', '2')

CALIBRATOR_REQUIREMENTS

Constant (tuple).

CALIBRATOR_REQUIREMENTS = ('level', 'fluctuation', 'frequency', 'distortion', 'supply_voltage', 'environmental_level', 'environmental_level_in_band', 'environmental_frequency', 'field_immunity')

CalibratorTableRow

CalibratorTableRow(
    lower_hz: float,
    upper_hz: float,
    includes_lower: bool,
    includes_upper: bool,
    class_ls: float | None,
    class_1: float | None,
    class_2: float | None,
)

One row of an IEC 60942:2017 table keyed by a range of nominal frequencies.

The printed ranges close and open their ends differently (“31,5 to 63”, ”> 63 to < 160”, ”> 1 250 to 4 000”), so each row says which of its two ends it includes. A cell the table prints as a dash, a range the standard gives that class no limit in, is None.

Attributes

Name	Description
`lower_hz`	The lower end of the range of nominal frequencies, in hertz.
`upper_hz`	The upper end, in hertz.
`includes_lower`	Whether a nominal frequency equal to `lower_hz` belongs to the row.
`includes_upper`	Whether a nominal frequency equal to `upper_hz` belongs to the row.
`class_ls`	The class LS figure, or `None` for a dash.
`class_1`	The class 1 figure, or `None` for a dash.
`class_2`	The class 2 figure, or `None` for a dash.

CalibratorTableRow.contains()

CalibratorTableRow.contains(nominal_frequency_hz: float) -> bool

Whether a nominal frequency falls in this row’s range.

Parameters

Name	Description
`nominal_frequency_hz`	The nominal frequency, in hertz.

Returns: True inside the range, its included ends counted.

CalibratorTableRow.for_class()

CalibratorTableRow.for_class(calibrator_class: str) -> float | None

The figure this row prints for a class, or None for a dash.

Parameters

Name	Description
`calibrator_class`	`"LS"`, `"1"` or `"2"`, or a /M designation, which reads the column of its class (5.1.14).

Returns: The printed figure, or None where the table prints a dash.

Raises

Exception	When
ValueError	for an unknown class.

DISTORTION_ACCEPTANCE_LIMITS_PERCENT

Constant (tuple).

DISTORTION_ACCEPTANCE_LIMITS_PERCENT = (CalibratorTableRow(lower_hz=31.5, upper_hz=160.0, includes_lower=True, includes_upper=False, class_ls=None, class_1=3.0, class_2=None), CalibratorTableRow(lower_hz=160.0, upper_hz=1250.0, includes_lower=True, includes_upper=True, class_ls=2.0, class_1=2.5, class_2=3.0), CalibratorTableRow(lower_hz=1250.0, upper_hz=16000.0, includes_lower=False, includes_upper=True, class_ls=None, class_1=3.0, class_2=None))

DISTORTION_MAX_UNCERTAINTY_PERCENT

Constant (tuple).

DISTORTION_MAX_UNCERTAINTY_PERCENT = (CalibratorTableRow(lower_hz=31.5, upper_hz=160.0, includes_lower=True, includes_upper=False, class_ls=None, class_1=1.0, class_2=None), CalibratorTableRow(lower_hz=160.0, upper_hz=1250.0, includes_lower=True, includes_upper=True, class_ls=0.5, class_1=0.5, class_2=1.0), CalibratorTableRow(lower_hz=1250.0, upper_hz=16000.0, includes_lower=False, includes_upper=True, class_ls=None, class_1=1.0, class_2=None))

ENVIRONMENTAL_FREQUENCY_ACCEPTANCE_LIMITS_PERCENT

Constant (mapping).

ENVIRONMENTAL_FREQUENCY_ACCEPTANCE_LIMITS_PERCENT = {'LS': 0.7, '1': 0.7, '2': 1.7}

ENVIRONMENTAL_FREQUENCY_MAX_UNCERTAINTY_PERCENT

Constant (mapping).

ENVIRONMENTAL_FREQUENCY_MAX_UNCERTAINTY_PERCENT = {'LS': 0.2, '1': 0.2, '2': 0.2}

ENVIRONMENTAL_LEVEL_ACCEPTANCE_LIMITS_DB

Constant (tuple).

ENVIRONMENTAL_LEVEL_ACCEPTANCE_LIMITS_DB = (CalibratorTableRow(lower_hz=31.5, upper_hz=160.0, includes_lower=True, includes_upper=False, class_ls=None, class_1=0.25, class_2=None), CalibratorTableRow(lower_hz=160.0, upper_hz=1250.0, includes_lower=True, includes_upper=True, class_ls=0.1, class_1=0.25, class_2=0.4), CalibratorTableRow(lower_hz=1250.0, upper_hz=4000.0, includes_lower=False, includes_upper=True, class_ls=None, class_1=0.3, class_2=None), CalibratorTableRow(lower_hz=4000.0, upper_hz=8000.0, includes_lower=False, includes_upper=True, class_ls=None, class_1=0.45, class_2=None), CalibratorTableRow(lower_hz=8000.0, upper_hz=16000.0, includes_lower=False, includes_upper=True, class_ls=None, class_1=0.6, class_2=None))

ENVIRONMENTAL_LEVEL_MAX_UNCERTAINTY_DB

Constant (tuple).

ENVIRONMENTAL_LEVEL_MAX_UNCERTAINTY_DB = (CalibratorTableRow(lower_hz=31.5, upper_hz=160.0, includes_lower=True, includes_upper=False, class_ls=None, class_1=0.25, class_2=None), CalibratorTableRow(lower_hz=160.0, upper_hz=1250.0, includes_lower=True, includes_upper=True, class_ls=0.1, class_1=0.15, class_2=0.2), CalibratorTableRow(lower_hz=1250.0, upper_hz=4000.0, includes_lower=False, includes_upper=True, class_ls=None, class_1=0.3, class_2=None), CalibratorTableRow(lower_hz=4000.0, upper_hz=8000.0, includes_lower=False, includes_upper=True, class_ls=None, class_1=0.35, class_2=None), CalibratorTableRow(lower_hz=8000.0, upper_hz=16000.0, includes_lower=False, includes_upper=True, class_ls=None, class_1=0.4, class_2=None))

FIELD_IMMUNITY_ACCEPTANCE_LIMITS_DB

Constant (mapping).

FIELD_IMMUNITY_ACCEPTANCE_LIMITS_DB = {'LS': 0.1, '1': 0.25, '2': 0.45}

FIELD_IMMUNITY_MAX_UNCERTAINTY_DB

Constant (mapping).

FIELD_IMMUNITY_MAX_UNCERTAINTY_DB = {'LS': 0.05, '1': 0.05, '2': 0.05}

FLUCTUATION_ACCEPTANCE_LIMITS_DB

Constant (tuple).

FLUCTUATION_ACCEPTANCE_LIMITS_DB = (CalibratorTableRow(lower_hz=31.5, upper_hz=63.0, includes_lower=True, includes_upper=True, class_ls=None, class_1=0.2, class_2=None), CalibratorTableRow(lower_hz=63.0, upper_hz=160.0, includes_lower=False, includes_upper=False, class_ls=None, class_1=0.1, class_2=None), CalibratorTableRow(lower_hz=160.0, upper_hz=1250.0, includes_lower=True, includes_upper=True, class_ls=0.03, class_1=0.07, class_2=0.15), CalibratorTableRow(lower_hz=1250.0, upper_hz=4000.0, includes_lower=False, includes_upper=True, class_ls=None, class_1=0.07, class_2=None), CalibratorTableRow(lower_hz=4000.0, upper_hz=8000.0, includes_lower=False, includes_upper=True, class_ls=None, class_1=0.07, class_2=None), CalibratorTableRow(lower_hz=8000.0, upper_hz=16000.0, includes_lower=False, includes_upper=True, class_ls=None, class_1=0.07, class_2=None))

FLUCTUATION_MAX_UNCERTAINTY_DB

Constant (tuple).

FLUCTUATION_MAX_UNCERTAINTY_DB = (CalibratorTableRow(lower_hz=31.5, upper_hz=63.0, includes_lower=True, includes_upper=True, class_ls=None, class_1=0.15, class_2=None), CalibratorTableRow(lower_hz=63.0, upper_hz=160.0, includes_lower=False, includes_upper=False, class_ls=None, class_1=0.1, class_2=None), CalibratorTableRow(lower_hz=160.0, upper_hz=1250.0, includes_lower=True, includes_upper=True, class_ls=0.02, class_1=0.03, class_2=0.05), CalibratorTableRow(lower_hz=1250.0, upper_hz=4000.0, includes_lower=False, includes_upper=True, class_ls=None, class_1=0.03, class_2=None), CalibratorTableRow(lower_hz=4000.0, upper_hz=8000.0, includes_lower=False, includes_upper=True, class_ls=None, class_1=0.03, class_2=None), CalibratorTableRow(lower_hz=8000.0, upper_hz=16000.0, includes_lower=False, includes_upper=True, class_ls=None, class_1=0.03, class_2=None))

FREQUENCY_ACCEPTANCE_LIMITS_PERCENT

Constant (mapping).

FREQUENCY_ACCEPTANCE_LIMITS_PERCENT = {'LS': 0.7, '1': 0.7, '2': 1.7}

FREQUENCY_MAX_UNCERTAINTY_PERCENT

Constant (mapping).

FREQUENCY_MAX_UNCERTAINTY_PERCENT = {'LS': 0.2, '1': 0.2, '2': 0.2}

LEVEL_ACCEPTANCE_LIMITS_DB

Constant (tuple).

LEVEL_ACCEPTANCE_LIMITS_DB = (CalibratorTableRow(lower_hz=31.5, upper_hz=63.0, includes_lower=True, includes_upper=True, class_ls=None, class_1=0.3, class_2=None), CalibratorTableRow(lower_hz=63.0, upper_hz=160.0, includes_lower=False, includes_upper=False, class_ls=None, class_1=0.3, class_2=None), CalibratorTableRow(lower_hz=160.0, upper_hz=1250.0, includes_lower=True, includes_upper=True, class_ls=0.1, class_1=0.25, class_2=0.4), CalibratorTableRow(lower_hz=1250.0, upper_hz=4000.0, includes_lower=False, includes_upper=True, class_ls=None, class_1=0.35, class_2=None), CalibratorTableRow(lower_hz=4000.0, upper_hz=8000.0, includes_lower=False, includes_upper=True, class_ls=None, class_1=0.45, class_2=None), CalibratorTableRow(lower_hz=8000.0, upper_hz=16000.0, includes_lower=False, includes_upper=True, class_ls=None, class_1=0.5, class_2=None))

LEVEL_MAX_UNCERTAINTY_DB

Constant (tuple).

LEVEL_MAX_UNCERTAINTY_DB = (CalibratorTableRow(lower_hz=31.5, upper_hz=63.0, includes_lower=True, includes_upper=True, class_ls=None, class_1=0.2, class_2=None), CalibratorTableRow(lower_hz=63.0, upper_hz=160.0, includes_lower=False, includes_upper=False, class_ls=None, class_1=0.2, class_2=None), CalibratorTableRow(lower_hz=160.0, upper_hz=1250.0, includes_lower=True, includes_upper=True, class_ls=0.1, class_1=0.15, class_2=0.35), CalibratorTableRow(lower_hz=1250.0, upper_hz=4000.0, includes_lower=False, includes_upper=True, class_ls=None, class_1=0.25, class_2=None), CalibratorTableRow(lower_hz=4000.0, upper_hz=8000.0, includes_lower=False, includes_upper=True, class_ls=None, class_1=0.35, class_2=None), CalibratorTableRow(lower_hz=8000.0, upper_hz=16000.0, includes_lower=False, includes_upper=True, class_ls=None, class_1=0.5, class_2=None))

SoundCalibratorMeasurements

SoundCalibratorMeasurements(
    level_deviation_db: float | Sequence[float] | None = None,
    level_uncertainty_db: float | Sequence[float] | None = None,
    static_pressure_correction_db: float | Sequence[float] | None = None,
    fluctuation_db: float | Sequence[float] | None = None,
    fluctuation_uncertainty_db: float | Sequence[float] | None = None,
    frequency_deviation_percent: float | Sequence[float] | None = None,
    frequency_uncertainty_percent: float | Sequence[float] | None = None,
    distortion_percent: float | Sequence[float] | None = None,
    distortion_uncertainty_percent: float | Sequence[float] | None = None,
    supply_voltage_deviation_db: float | Sequence[float] | None = None,
    supply_voltage_uncertainty_db: float | Sequence[float] | None = None,
    environmental_level_deviation_db: float | Sequence[float] | None = None,
    environmental_level_uncertainty_db: float | Sequence[float] | None = None,
    environmental_level_in_band_deviation_db: float | Sequence[float] | None = None,
    environmental_level_in_band_uncertainty_db: float | Sequence[float] | None = None,
    environmental_frequency_deviation_percent: float | Sequence[float] | None = None,
    environmental_frequency_uncertainty_percent: float | Sequence[float] | None = None,
    field_immunity_deviation_db: float | Sequence[float] | None = None,
    field_immunity_uncertainty_db: float | Sequence[float] | None = None,
)

What a laboratory measured on a sound calibrator, for IEC 60942:2017.

Each requirement is a pair of fields, the measured deviation and the actual expanded uncertainty of its measurement for a coverage probability of 95 %, and each pair is given or left out together. A field takes one number or a sequence of them, one per measurement condition (the supply voltages of A.5.5.6 to A.5.5.8, the static pressures, temperatures and humidities of A.6, the settings of a multi-level calibrator at one frequency); an uncertainty given as one number applies to all of them.

Attributes

Name	Description
`level_deviation_db`	Measured minus specified sound pressure level (5.3.2), in decibels: the mean of at least three couplings at the nominal supply voltage (A.5.5.3, B.4.6.3.1), and also the level measured, without replications, at each end of the supply-voltage range, which has to meet Table 2 too (5.3.4, A.5.5.6 to A.5.5.8). For an /M pistonphone, as measured: the correction below is added to it.
`level_uncertainty_db`	Its expanded uncertainty, in decibels.
`static_pressure_correction_db`	The manufacturer’s correction to the reference static pressure for a class LS/M or 1/M pistonphone (5.1.5, B.4.3.2), in decibels, added to `level_deviation_db`. Required for those designations whenever the level is given (`0.0` at the reference pressure) and refused for every other (5.1.7).
`fluctuation_db`	The short-term level fluctuation (5.3.3): the larger of the absolute differences between the maximum and the minimum F-weighted level and their mean over 60 s, in decibels.
`fluctuation_uncertainty_db`	Its expanded uncertainty, in decibels.
`frequency_deviation_percent`	Measured minus specified frequency, in per cent of the specified frequency (5.4.2).
`frequency_uncertainty_percent`	Its expanded uncertainty, in per cent of the specified frequency.
`distortion_percent`	The total distortion + noise over 22,4 Hz to 22,4 kHz (5.6), in per cent.
`distortion_uncertainty_percent`	Its expanded uncertainty, in per cent distortion.
`supply_voltage_deviation_db`	The level at a supply voltage at an end of the permitted range minus the level at the nominal voltage (5.3.4), in decibels, judged against Table 3. The same level minus the specified level has to meet Table 2 as well (5.3.4, A.5.5.7, A.5.5.8), and goes into `level_deviation_db` with the others.
`supply_voltage_uncertainty_db`	Its expanded uncertainty, in decibels.
`environmental_level_deviation_db`	The level at an environmental condition outside the band of 5.3.2 minus the level at reference conditions (5.5), in decibels; for an /M pistonphone already corrected for static pressure, one correction per condition (A.6.2.3).
`environmental_level_uncertainty_db`	Its expanded uncertainty, in decibels.
`environmental_level_in_band_deviation_db`	The level at a static pressure of the A.6.2 sweep inside the band of 5.3.2 (97 kPa to 105 kPa) minus the level at reference conditions, in decibels, corrected as above for an /M pistonphone. A.6.2.4 judges the points of the sweep against Table 2 or Table 5 “as appropriate for the static pressure”, so the points inside the band are given here and graded against Table 2, and the points outside it go into `environmental_level_deviation_db`. The maximum uncertainty is that of Table A.4 for both.
`environmental_level_in_band_uncertainty_db`	Its expanded uncertainty, in decibels.
`environmental_frequency_deviation_percent`	The frequency at such a condition minus the frequency at reference conditions, in per cent of the specified frequency (5.5).
`environmental_frequency_uncertainty_percent`	Its expanded uncertainty, in per cent of the specified frequency.
`field_immunity_deviation_db`	The level in a power- or radio-frequency field minus the level without it (5.9.4.2), in decibels.
`field_immunity_uncertainty_db`	Its expanded uncertainty, in decibels, the field measurement excluded (A.7.4.8).

SoundCalibratorMeasurements.pairs()

SoundCalibratorMeasurements.pairs(
    requirement: str,
) -> tuple[tuple[float, float], ...]

The (deviation, uncertainty) pairs measured for a requirement.

Parameters

Name	Description
`requirement`	One of `CALIBRATOR_REQUIREMENTS`.

Returns: One pair per measurement, empty when it was not measured.

Raises

Exception	When
ValueError	for an unknown requirement.

SoundCalibratorRequirement

SoundCalibratorRequirement(
    name: str,
    clause: str,
    tables: str,
    verifications: tuple[ConformanceVerification, ...],
)

One requirement of IEC 60942:2017, judged on every measurement of it.

Attributes

Name	Description
`name`	The requirement, one of `CALIBRATOR_REQUIREMENTS`.
`clause`	The subclause of IEC 60942:2017 that states it.
`tables`	Where its acceptance limit and maximum-permitted uncertainty are printed.
`verifications`	One `ConformanceVerification` per measurement, in the order they were given.

SoundCalibratorRequirement.acceptance_limits

property

The (lower, upper) acceptance limits, the same for every measurement.

SoundCalibratorRequirement.max_uncertainty

property

The maximum-permitted expanded uncertainty for the requirement.

SoundCalibratorRequirement.passes

property

Whether every measurement of the requirement demonstrates conformance.

SoundCalibratorRequirement.plot()

SoundCalibratorRequirement.plot(
    ax: Axes | None = None,
    *,
    language: str = 'en',
    **kwargs: Any,
) -> Axes

Draw each measurement against the requirement’s limits, as Figure E.1.

Requires matplotlib (pip install phonometry[plot]); returns the Axes.

Parameters

Name	Description
`ax`	Existing axes, or `None` to create a figure.
`language`	Label language, `"en"` (default) or `"es"`.
`kwargs`	Forwarded to `phonometry._plot.metrology.plot_sound_calibrator_requirement`.

SoundCalibratorRequirement.unit

property

The unit the requirement is measured in, "dB" or "%".

SoundCalibratorVerification

SoundCalibratorVerification(
    calibrator_class: str,
    nominal_frequency_hz: float,
    environmental_test: str,
    measurements: SoundCalibratorMeasurements,
    requirements: tuple[SoundCalibratorRequirement, ...],
)

The IEC 60942:2017 verdict on one setting of a sound calibrator.

Attributes

Name	Description
`calibrator_class`	The designation it was judged as, one of `CALIBRATOR_CLASSES`.
`nominal_frequency_hz`	The nominal frequency of the setting, in hertz, which selects the rows of the banded tables.
`environmental_test`	`"full"` (Tables 5 and 6) or `"abbreviated"` (the reduced limits of A.6.4.7).
`measurements`	The record the verdict was reached on.
`requirements`	One `SoundCalibratorRequirement` per requirement measured, in the order of `CALIBRATOR_REQUIREMENTS`.

SoundCalibratorVerification.failed

property

The names of the requirements that do not pass.

SoundCalibratorVerification.passes

property

Whether every requirement measured demonstrates conformance.

False when nothing was measured: a record with no measurement in it qualifies nothing. With environmental_test="abbreviated" a failed environmental requirement means the full tests of A.6.5 to A.6.7 are due (A.6.1.2), not that the calibrator does not conform.

SoundCalibratorVerification.plot()

SoundCalibratorVerification.plot(
    ax: Axes | None = None,
    *,
    language: str = 'en',
    **kwargs: Any,
) -> Axes

Draw how much of each allowance every measurement uses.

One pair of bars per measurement: the deviation as a share of its acceptance limit and the uncertainty as a share of its maximum. A requirement conforms when both of its bars stop at or before 100 %.

Requires matplotlib (pip install phonometry[plot]); returns the Axes.

Parameters

Name	Description
`ax`	Existing axes, or `None` to create a figure.
`language`	Label language, `"en"` (default) or `"es"`.
`kwargs`	Forwarded to `phonometry._plot.metrology.plot_sound_calibrator_verification`.

SoundCalibratorVerification.requirement()

SoundCalibratorVerification.requirement(
    name: str,
) -> SoundCalibratorRequirement

The verdict on one requirement.

Parameters

Name	Description
`name`	One of `CALIBRATOR_REQUIREMENTS`.

Returns: Its SoundCalibratorRequirement.

Raises

Exception	When
KeyError	when that requirement was not measured.

SUPPLY_VOLTAGE_ACCEPTANCE_LIMITS_DB

Constant (mapping).

SUPPLY_VOLTAGE_ACCEPTANCE_LIMITS_DB = {'LS': 0.02, '1': 0.06, '2': 0.16}

SUPPLY_VOLTAGE_MAX_UNCERTAINTY_DB

Constant (mapping).

SUPPLY_VOLTAGE_MAX_UNCERTAINTY_DB = {'LS': 0.02, '1': 0.04, '2': 0.04}

verify_sound_calibrator

verify_sound_calibrator(
    calibrator_class: str,
    measurements: SoundCalibratorMeasurements,
    *,
    nominal_frequency_hz: float,
    environmental_test: str = 'full',
) -> SoundCalibratorVerification

Verify what a laboratory measured on a sound calibrator against IEC 60942:2017.

Every requirement given in measurements is judged by the conformance rule of IEC TC 29 (5.1.15, phonometry.metrology.verify_conformance) against the acceptance limit and the maximum-permitted uncertainty that the class and the nominal frequency select, and the calibrator passes when every measurement of every requirement does. The requirements, their clauses and tables are listed in the module documentation of phonometry.metrology.sound_calibrator.

One call judges one setting: a multi-frequency calibrator is verified once per frequency setting, because the banded tables change with it. For an LS/M or 1/M pistonphone the level is graded after the manufacturer’s static-pressure correction is added to it (5.3.2, B.4.3.2).

Parameters

Name	Description
`calibrator_class`	`"LS"`, `"LS/M"`, `"1"`, `"1/M"` or `"2"` (Table 1); `1` and `2` may be given as integers.
`measurements`	What was measured, as `SoundCalibratorMeasurements`.
`nominal_frequency_hz`	The nominal frequency of the setting, in hertz. It has to be one the class has acceptance limits at: 31,5 Hz to 16 kHz for class 1, 160 Hz to 1 250 Hz for classes LS and 2 (5.1.2).
`environmental_test`	`"full"` (default) judges the environmental requirements against Tables 5 and 6; `"abbreviated"` against the reduced limits of A.6.4.7, where a failure calls for the full tests rather than a non-conformance (A.6.1.2).

Returns: The SoundCalibratorVerification, whose passes is the verdict and whose requirements carry one verdict each.

Raises

Exception	When
ValueError	for an unknown class or environmental test, a nominal frequency the class has no acceptance limit at, a static-pressure correction given for a class that is not an /M pistonphone, or one missing for an /M pistonphone whose level is given.

Creado y mantenido por José Manuel Requena Plens ORCID Todos los proyectos